|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: IT Transformer connection phasing posted by Chip647 on September 17, 2016 at 06:27:05:
It's pretty important you connect it up right - it sounds worse the wrong way around.I'm connecting it brown to HT, blue to anode. The other side black to grids and green to ground. If you do that you should be good to go.
But I'll give you a tip - it sounds better as a plate choke. Leave the secondaries unconnected and use something like a FT-3 teflon output cap. that's my preference.
Edits: 09/17/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: IT Transformer connection phasing - andy evans 09:36:04 09/17/16 (7)
- RE: IT Transformer connection phasing - Chip647 14:35:13 09/17/16 (6)
- RE: IT Transformer connection phasing - deafbykhorns 15:26:21 09/17/16 (5)
- Shunt capacitance - Triode_Kingdom 23:57:05 09/17/16 (3)
- RE: Makes perfect sense now - deafbykhorns 10:56:16 09/18/16 (2)
- I connected it wrong at first too.... - andy evans 11:40:28 09/18/16 (1)
- RE: I connected it wrong at first too.... - deafbykhorns 16:20:05 09/18/16 (0)
- RE: IT Transformer connection phasing - Jim Doyle 19:08:12 09/17/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
