Got rid of almost all of the hum in the 26/26/845 by going to dc filaments on the 845. I still have a tiny bit left though that is just barely audible from my listening position. I noticed that it does not change with an increase in volume level, just a steady amount. Is that likely to be from the PSU? I had better check it again on psud2 for ripple. I don't think it is coming from the 26's as the hum pots seem able to cancel it out completely there.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Where from that hum?? - vinnie2 14:13:25 09/11/16 (48)
- update 5 - vinnie2 05:19:02 09/14/16 (7)
- RE: use a spectrum analyzer ... - deathtube 667 04:01:42 09/15/16 (4)
- RE: use a spectrum analyzer ... - vinnie2 06:06:11 09/15/16 (3)
- RE: use a spectrum analyzer ... - deathtube 667 12:24:05 09/15/16 (0)
- free spectrum analyzer - Tre' 07:29:00 09/15/16 (1)
- RE: free spectrum analyzer - vinnie2 12:36:50 09/15/16 (0)
- RE: update 5 - Tre' 07:41:07 09/14/16 (1)
- RE: update 5 - vinnie2 09:08:56 09/14/16 (0)
- update 4 - vinnie2 12:47:50 09/13/16 (2)
- Vinnie2, have you check to see if you have... - Cougar 19:41:54 09/13/16 (1)
- RE: Vinnie2, have you check to see if you have... - vinnie2 02:55:48 09/14/16 (0)
- update 3 - vinnie2 05:36:09 09/13/16 (16)
- RE: update 3 - Tre' 07:36:32 09/13/16 (15)
- RE: update 3 - vinnie2 09:42:29 09/13/16 (1)
- RE: update 3 - Tre' 12:52:35 09/13/16 (0)
- Wait. Weren't you talking about 60Hz hum from filaments? (n/t) - FenderLover 08:24:48 09/13/16 (12)
- RE: Wait. Weren't you talking about 60Hz hum from filaments? (n/t) - vinnie2 09:17:18 09/13/16 (11)
- RE: Wait. Weren't you talking about 60Hz hum from filaments? (n/t) - Tre' 09:44:44 09/13/16 (10)
- Filament hum - Triode_Kingdom 10:40:52 09/13/16 (8)
- RE: Filament hum - Tre' 12:45:28 09/13/16 (0)
- RE: Filament hum - vinnie2 12:42:12 09/13/16 (6)
- RE: Filament hum - Triode_Kingdom 19:10:38 09/13/16 (5)
- RE: Filament hum - vinnie2 03:18:40 09/14/16 (4)
- RE: Filament hum - Triode_Kingdom 12:17:24 09/14/16 (3)
- RE: Filament hum - vinnie2 13:05:24 09/14/16 (2)
- RE: Ultrasonic Link - deafbykhorns 10:20:56 09/15/16 (1)
- RE: Ultrasonic Link - vinnie2 12:51:13 09/15/16 (0)
- RE: Wait. Weren't you talking about 60Hz hum from filaments? (n/t) - vinnie2 09:48:03 09/13/16 (0)
- RE: Where from that hum?? - Michael Samra 15:17:55 09/12/16 (2)
- RE: Where from that hum?? - vinnie2 15:52:16 09/12/16 (1)
- RE: Where from that hum?? - Michael Samra 13:50:54 09/13/16 (0)
- update 2 - vinnie2 07:04:43 09/12/16 (2)
- RE: update 2 - Tre' 09:13:53 09/12/16 (1)
- RE: update 2 - vinnie2 15:56:36 09/12/16 (0)
- update - vinnie2 06:06:40 09/12/16 (1)
- RE: update - FenderLover 06:22:33 09/12/16 (0)
- I don't know how the power supply is... - Cougar 21:47:44 09/11/16 (4)
- RE: I don't know how the power supply is... - vinnie2 04:08:22 09/12/16 (3)
- Sorry for the late reply... - Cougar 19:29:17 09/13/16 (0)
- RE: I don't know how the power supply is... - SteveBrown 15:38:23 09/12/16 (1)
- RE: I don't know how the power supply is... - vinnie2 16:00:17 09/12/16 (0)
- RE: Where from that hum?? - deafbykhorns 16:08:11 09/11/16 (5)
- RE: Where from that hum?? - vinnie2 18:45:23 09/11/16 (4)
- RE: Try the Ultrasonic approach in lieu of DC - deafbykhorns 18:38:24 09/13/16 (2)
- RE: Try the Ultrasonic approach in lieu of DC - vinnie2 03:19:43 09/14/16 (1)
- RE: Try the Ultrasonic approach in lieu of DC - deafbykhorns 07:36:06 09/15/16 (0)
- RE: Where from that hum?? - megasat16 20:32:25 09/11/16 (0)
- How MUCH, measure for us all ...... - drlowmu 14:53:23 09/11/16 (0)