|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Hammond Data - free lunch with Graetz Choke in? posted by andy evans on September 10, 2016 at 02:55:36:
You stated the transformer was 125-0-125....meaning it has a center tap. Therefore only the last two pics, full wave, NOT the bridge ones apply.
Choke input will get you lower voltage, more current, and better regulation (less difference between peak and average output voltage).
Bottom line is the highest voltage is going to be cap input and even with solid state diodes only about 175 volts.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Hold on a sec - Russ57 10:42:56 09/10/16 (9)
- See text... - andy evans 11:00:01 09/10/16 (8)
- Yup, not so - Russ57 11:21:04 09/10/16 (7)
- Ah - informative.... - andy evans 12:14:49 09/10/16 (6)
- RE: Ah - informative.... - hennfarm 12:25:13 09/10/16 (5)
- Have the 01A preamp up and running... - andy evans 14:13:17 09/11/16 (4)
- RE: Have the 01A preamp up and running... - euro21 11:03:15 09/14/16 (1)
- Ah - useful info on HT voltage for Gyrator! - andy evans 02:41:01 09/15/16 (0)
- Just curious, would you do a voltage check? - Russ57 18:14:52 09/12/16 (1)
- This is how I wired it - andy evans 12:11:28 09/13/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
