Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

I can use some assitance here.These are my Fisher 55a amps




" One needs a meter although it works without as I put a resistor in place of it.If you look at the schematic,it is basically in series with the tied output tube cathodes to ground.The one meter you see is actually a NOS one when I bought that amp.You can see it in the first photo.My question is,does anyone have a meter and if not,is there one that will physically fit in its place..I'm thinking 130ma meter should sufficient.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken


This post is made possible by the generous support of people like you and our sponsors:
  Western Glow Tube Service  


Topic - I can use some assitance here.These are my Fisher 55a amps - Michael Samra 20:16:00 08/09/16 (16)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.