In Reply to: RE: More than a cathode follower posted by GRH on May 19, 2016 at 07:01:31:
GRH - You could try this empirically. Install the 12BH7's then check the heater voltage. If it's still within 10% of 6.3v (or 12.6v), you're OK.
The p. trans. may get a bit hotter though.-Pete
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: More than a cathode follower - pmaneri@samsontech.com 11:44:36 06/24/16 (0)