RE: May use a 76

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

In Reply to: May use a 76 posted by cvandyke on August 27, 2015 at 09:15:59:

Check the link below. It would be a good place to start. Sub a 76 for the 27, sub the LS19 for the A-18, and use whatever OT you have (presumably UTC?). You may have to adjust some of the component values, and for the sake of getting it up and running you could use single components where Jeff has paralleled some, but it should work as drawn.

I'm on board with using a choke load on the 76, but you're opening up a can of worms. The math gets more complicated.

http://db.audioasylum.com/mhtml/m.html?forum=tubediy&n=24065 (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

Follow Ups Full Thread

Topic - Driver for UTC LS-19? - cvandyke 06:42:37 08/25/15 (7)

May use a 76 - cvandyke 09:15:59 08/27/15 (1)

RE: May use a 76 - gilmorneau 07:13:51 08/28/15 (0)

a few more thoughts.... - gilmorneau 21:34:17 08/25/15 (0)

RE: Driver for UTC LS-19? - gilmorneau 11:28:23 08/25/15 (3)

RE: Driver for UTC LS-19? - PakProtector 09:01:41 08/27/15 (1)

RE: Driver for UTC LS-19? - cvandyke 09:22:21 08/27/15 (0)

RE: Driver for UTC LS-19? - danlaudionut 12:08:13 08/25/15 (0)

Follow Ups

RE: May use a 76 - gilmorneau 07:13:51 08/28/15 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.