In Reply to: RE: interesting alternative posted by RayP on August 26, 2015 at 01:07:11:
Secondary should be rated for voltage to ground and primary to secondary. ONE of these modules would have 1000V to ground, next would have 950V, etc.
Safety test for power supplies is typically 1500VAC (2100 peak) from AC line to output and AC line to ground, 500V from output to ground. This a SHORT TERM test (10 seconds or one minute) not a rating!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: interesting alternative - Tom Bavis 10:07:34 08/26/15 (0)