|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Thanks Stephen posted by lovetube on February 28, 2011 at 05:58:31:
C2 is 10n. R11 is 1000k or 1M.
2.7k seems a bit high according to the sim for a paralleled 6CG7. What anode voltage does it run at? I had to guess an HT as well and used 300V. With 2.7k, I'd expect the anode to be about 260V on a 300V HT. Still sims OK. Maybe it sounds better that way? It's not a valve I have any experience with.
Paralleling the 12AT7 would lower the drive Z. It would change the series resistor to the EQ as well. I'm not a fan of paralleling things up. My preference is to chose the right thing in the first place.
cheers,
Stephen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thanks Stephen - Stephen R 07:26:10 02/28/11 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]