In Reply to: Tuner Issues; Right Channel keeps cutting in and out, repair possible? posted by TubeAcolyte on September 13, 2010 at 13:41:22:
Could be a "tape monitor" switch, since those are in the signal path. Try cycling those (if there's more than one) a bunch of times. Or hit them with some tuner spray or contact cleaner.
Rarely, there can be a cold solder joint or unsoldered connection, or sketchy connector contact in a cable harness link that causes this kind of problem. It can be frustrating to troubleshoot because merely touching the component or connection, or applying a test signal, will temporarily fix it.
Components that fail generally stay failed. Capacitors become resistors, resistors become insulators after releasing smoke, transistors become noise generators or short circuits.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tuner Issues; Right Channel keeps cutting in and out, repair possible? - bassbinotoko 12:59:53 09/14/10 (1)
- RE: Tuner Issues; Right Channel keeps cutting in and out, repair possible? - TubeAcolyte 16:55:57 09/23/10 (0)