Home SET Asylum

Single Ended Triodes (SETs), the ultimate tube lovers dream.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ SET Asylum ]
[ Alert Moderator ]

RE: What tubes to use with this Interstage Transformers?

"If it can simulate a real 5000ohm Zout or a 50ohm Zout,"

It can.


"I highly doubt that you will see the same thing between the 5000ohm impedance FG and 5K ohm impedance FG in series with 5K resistor."

I think you mean a 5000 ohm impedance FG vs. a 50 ohm impedance FG in series with a 5k resistor.

Well, no. The one has a output impedance of 5k ohms and the other has a output impedance of 5.05k ohms.

Other that that they will be the same.

"At the very least, you will see a very varied phase angle between the results from a real 5K ohm FG or source and a 50ohm FG with a 5K series resistors. "

No, the phase (just like the Fc and amplitude loss) was the same as well.

Should I post screen shots of the sims? Or I could post the file and you could run it yourself?

Do you have and use spice? I use LTspiceIV. It's free and pretty easy to use.


Tre'


Have Fun and Enjoy the Music
"Still Working the Problem"

This post is made possible by the generous support of people like you and our sponsors:
  Analog Engineering Associates  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]