In Reply to: RE: First venture into SETs. posted by FenderLover on July 7, 2016 at 18:40:54:
That's certainly a possibility. Another inmate had good success putting blocks of ballistic rubber under his speakers, so I had considered putting a 2" slab under the subs and bridge tables to isolate them from mechanical transmission of vibrations, although that would do nothing for acoustical transmission. There are a couple of suppliers in MN. A slab of rubber under the subs and tables with a stone slab on top of the table might be the ticket - then put some points underneath the amps and call it done. Or I might be better served by making a set of wall-mounted shelves to put the amps on. I'll figure it out, although I'd like to test some of the principles before springing for the materials.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: First venture into SETs. - Todd A. 06:35:06 07/08/16 (1)
- RE: First venture into SETs. - FenderLover 18:36:20 07/08/16 (0)