In Reply to: Elrog 300B posted by alexz on January 25, 2015 at 11:13:03:
True Audiophile posted ER300B datasheet:
http://www.trueaudiophile.com/template/ER300B-Datasheet.pdfClose to what Paul has calculated, Ineterstingly, In my measurements distortions were less then published.
Edits: 02/07/15 02/08/15
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - Elrog 300B - alexz 11:13:03 01/25/15 (75)
- This is as expected when looking at published tube curves - Balle Clorin 06:26:09 03/22/15 (2)
- And now some real distrion data Emission lab TJ300 with different 6SL7 input tube - Balle Clorin 05:58:51 05/01/15 (1)
- RE: And now some real distrion data Emission lab TJ300 with different 6SL7 input tube - nicoch 05:57:03 05/03/15 (0)
- RE: Elrog 300B - alexz 14:44:14 02/07/15 (1)
- RE: Elrog 300B - charles1dad 12:43:00 03/05/15 (0)
- RE: Elrog 300B - Tre' 19:10:36 01/30/15 (10)
- RE: Elrog 300B - alexz 19:37:21 01/30/15 (9)
- RE: Elrog 300B - Tre' 20:10:43 01/30/15 (8)
- RE: Elrog 300B - alexz 23:33:18 01/30/15 (7)
- RE: Elrog 300B - Tre' 08:14:11 01/31/15 (6)
- RE: Elrog 300B - alexz 21:04:50 01/31/15 (5)
- RE: Elrog 300B - Tre' 09:24:27 02/01/15 (4)
- RE: Elrog 300B - Paul Joppa 13:28:56 02/01/15 (3)
- RE: Elrog 300B - alexz 15:37:45 02/01/15 (1)
- RE: Elrog 300B - Tre' 18:09:53 02/01/15 (0)
- RE: Elrog 300B - Tre' 13:47:13 02/01/15 (0)
- Some puzzling calculations - Paul Joppa 17:21:21 01/27/15 (14)
- RE: Some puzzling calculations - alexz 19:14:33 01/27/15 (1)
- RE: Some puzzling calculations - Paul Joppa 20:16:58 01/27/15 (0)
- RE: Some puzzling calculations - alexz 18:04:39 01/27/15 (4)
- RE: Some puzzling calculations - Paul Joppa 20:11:31 01/27/15 (3)
- RE: Some puzzling calculations - alexz 05:57:18 01/28/15 (2)
- RE: Some puzzling calculations - Paul Joppa 12:45:08 01/28/15 (1)
- RE: Some puzzling calculations - alexz 18:26:50 01/28/15 (0)
- RE: Some puzzling calculations - alexz 17:58:37 01/27/15 (6)
- Remarkable ?distortion cancellation between input/driver end output tube does that. - Balle Clorin 07:10:27 03/22/15 (5)
- RE: Remarkable ?distortion cancellation between input/driver end output tube does that. - charles1dad 02:29:29 03/24/15 (4)
- RE: Remarkable ?distortion cancellation between input/driver end output tube does that. - alexz 09:53:41 03/24/15 (3)
- RE: Remarkable ?distortion cancellation between input/driver end output tube does that. - charles1dad 22:38:09 03/24/15 (2)
- Yes I rarely pull out more than 1.5W. and I think... - Balle Clorin 11:15:31 03/26/15 (0)
- RE: Remarkable ?distortion cancellation between input/driver end output tube does that. - alexz 11:35:31 03/25/15 (0)
- RE: Elrog 300B - alexz 08:01:14 01/27/15 (1)
- RE: Elrog 300B - tube wrangler 09:26:47 01/27/15 (0)
- RE: Elrog 300B - alexz 04:59:49 01/26/15 (36)
- RE: Elrog 300B - tube wrangler 19:00:12 01/26/15 (35)
- Maximum Output - RPMac 07:47:30 01/27/15 (34)
- RE: Maximum Output - Tre' 13:24:53 01/27/15 (32)
- RE: Maximum Output - tube wrangler 13:57:09 01/28/15 (11)
- RE: Maximum Output - Tre' 14:46:04 01/28/15 (10)
- RE: Maximum Output - tube wrangler 18:46:29 01/28/15 (9)
- RE: Maximum Output - Tre' 21:12:35 01/28/15 (8)
- RE: Maximum Output - tube wrangler 21:55:51 01/28/15 (6)
- RE: Maximum Output - kyle 12:26:31 01/29/15 (0)
- I was following this thread hoping to learn something... alas, Dennis... you start dancing, sigh answer the ? - Cleantimestream 11:38:10 01/29/15 (3)
- RE: I was following this thread hoping to learn something... alas, Dennis... you start dancing, sigh answer the ? - tube wrangler 19:16:02 01/29/15 (2)
- I will assume that I shouldn't be holding my breath for an answer to.... - Tre' 08:36:50 01/30/15 (1)
- RE: I will assume that I shouldn't be holding my breath for an answer to.... - tube wrangler 10:39:32 01/30/15 (0)
- RE: Maximum Output - Tre' 22:21:15 01/28/15 (0)
- RE: Maximum Output - tube wrangler 21:52:58 01/28/15 (0)
- RE: Maximum Output - smart845 01:40:02 01/28/15 (11)
- RE: Maximum Output - Tre' 07:59:40 01/28/15 (10)
- RE: Maximum Output - dave slagle 10:10:36 01/28/15 (9)
- RE: Maximum Output - Tre' 14:18:55 01/28/15 (8)
- RE: Maximum Output - mqracing 01:37:08 01/29/15 (7)
- I'd love to.... - Tre' 07:30:11 01/29/15 (6)
- RE: I'd love to.... - mqracing 07:52:07 01/29/15 (5)
- Thank you - Tre' 09:10:41 01/29/15 (4)
- RE: Thank you - mqracing 10:21:31 01/29/15 (0)
- More - Tre' 09:52:11 01/29/15 (2)
- RE: Maximum Output - alexz 15:17:56 01/27/15 (5)
- RE: Maximum Output - Tre' 15:53:07 01/27/15 (4)
- RE: Maximum Output - Tre' 16:03:04 01/27/15 (3)
- RE: Maximum Output - Paul Joppa 17:23:36 01/27/15 (0)
- Thomas Mayer - RPMac 16:55:49 01/27/15 (1)
- Thanks. (nt) - Tre' 18:12:39 01/27/15 (0)
- RE: Maximum Output - tube wrangler 14:57:27 01/27/15 (1)
- RE: Maximum Output - Tre' 15:16:13 01/27/15 (0)
- RE: Maximum Output - Caucasian Blackplate 11:13:23 01/27/15 (0)
- RE: Elrog 300B - tube wrangler 22:01:52 01/25/15 (1)
- RE: Elrog 300B - alexz 11:24:21 01/27/15 (0)
- RE: Elrog 300B - Paul Joppa 21:37:56 01/25/15 (0)
- RE: Elrog 300B - alexz 14:25:06 01/25/15 (0)
- RE: Elrog 300B - Frihed89 13:47:51 01/25/15 (0)
Follow Ups
- RE: Elrog 300B - alexz 14:44:14 02/07/15 (1)
- RE: Elrog 300B - charles1dad 12:43:00 03/05/15 (0)