In Reply to: RE: AES SE-1 Blowing Fuses posted by returntohifi on September 27, 2014 at 21:07:50:
Hi,
I put the tubes in remeasured the filament voltage which is now 5.3 v for the 300B as per their schematic and the plate voltage is 337V also per schematic. I still don't know what caused the original problem but the failed bridge rectifier and hot transformers has occurred with a couple of other owners of the se-1.
Alex
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: AES SE-1 Blowing Fuses - returntohifi 16:00:51 09/29/14 (0)