In Reply to: Re: My real interest is basic. posted by GEO on February 5, 2007 at 05:10:25:
Each of the output tubes you have listed have their own plate resistance. In Class A, a triode tube will give good output power and have low distortion with a load a least 3 times it's plate resistance. The higher the load impedance the lower the output power and the lower the distortion.A 45 has a plate resistance of about 1650 ohms. Three times that is 4950 ohms. A 300b has a plate resistance of 700 ohms. You see a lot of people using 2500 ohm transformers for the 300b. A 300b will have less output power and lower distortion if it is loaded with a 5000 ohm transformer.
One size does not fit all. But there is some wiggle room.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: My real interest is basic. - Tre' 14:16:35 02/05/07 (1)
- Thanks for the Reply - GEO 15:51:55 02/05/07 (0)