In Reply to: Like so Mike? Parafeed compact 2A3 posted by Bas Horneman on May 16, 2004 at 07:25:01:
Konnichiwa,It may seem counter-intuitive, but one parallel feed capacitors will do fine. Using two only quadruples cost (2 Capacitors with double the capacitance required) and makes the sound worse.
If Mike could make a PP Parallel Feed Output with a the "centertap" brought out as two wires you could place the Cap there. Otherwise one in one leg will do fine.
Otherwise I second the recommendation of an anode and grid choke for the ECC99 (or even a better driver valve), simply adjust the input valves cathode resistor for the correct bias.
Sayonara
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Like so Mike? Parafeed compact 2A3 - Kuei Yang Wang 10:27:12 05/16/04 (6)
- I have some 5842's and 6c45...but am afraid - Bas Horneman 13:28:42 05/16/04 (1)
- Re: I have some 5842's and 6c45...but am afraid - keto 17:17:20 05/16/04 (0)
- Re: Like so Mike? Parafeed compact 2A3 - mqracing 13:05:25 05/16/04 (3)
- "three magic building blocks" - keto 20:14:21 05/18/04 (2)
- Re: "three magic building blocks" - pistoljoe 05:02:38 05/19/04 (1)
- the Harry F. Olson book... - keto 17:07:49 05/19/04 (0)