In Reply to: RE: Plate chokes for 10k Rp type tube posted by mqracing on December 6, 2016 at 19:35:54:
Hello MSL,
Thanks for the response, the application is the input tube of the attached amplifier schematic.
Rp is ~10k and the bias resistor in that stage carries also the filament current, the 18R value is correct.
I really needed as much HF response as possible, and I'm not sure that I really need the ~300H that the EXO-010 might present, with the info provided is it possible to calculate the in circuit HF limitations with what you have in mind?.
Need a pair of plate chokes for the driver tube as well, much simpler I'm assuming.. Ip = 20mA.. Rp of the tube is ~2k.
Thanks,
Shane
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Plate chokes for 10k Rp type tube - shane. 22:18:30 12/06/16 (1)
- RE: Plate chokes for 10k Rp type tube - Caucasian Blackplate 07:16:26 03/11/17 (0)