|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
|
|
K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
In Reply to: Re: Lundahl Transformer Attenuator?? posted by SuperB on October 17, 2002 at 00:11:36:
You won't have much to worry about with what you put on the output side of the TX-102, because it steps down the source impedance of whatever you feed its input (except at full volume). The area of concern is what you connect to its input. A tube RIAA with a plate-loaded output, such as the RCA circuit, will very likely have bandwidth problems when driving a TX-102. OTOH, a phono stage with a cathode follower output or a step-down transformer will have no trouble.Bent Audio only sells the MK II versions now, as far as I know. There are no differences between the MK I and Mk II that would involve usable impedances.
For a thorough discussion of these units, you might find Thorsten Loesch's application note useful. This is posted at the Bent Audio forum on Harmonic Discord--the link appears below.
Gary Dahl
Edits: 07/11/20 07/11/20 07/11/20 07/11/20 07/11/20
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Lundahl Transformer Attenuator?? - gdahl 08:05:32 10/17/02 (2)
- Re: Lundahl Transformer Attenuator?? - SuperB 01:11:35 10/19/02 (1)
- Re: Lundahl Transformer Attenuator?? - KevinC 06:07:08 10/19/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]