In Reply to: RE: Wiring autoformer as HF attenuator posted by D Mike on August 1, 2016 at 09:22:48:
Interesting - If I want to bring my 802 in at 8khz, with about 4 dB attenuation, I could use a 1uF Cap. That same cap would bring the crossover frequency down to 6khz at 5 dB attenuation, and 5khz at 6 dB.
With the 802G, this 1uF cap in series could easily work in a 3dB range.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Wiring autoformer as HF attenuator - Randal P 12:53:49 08/01/16 (1)
- RE: Wiring autoformer as HF attenuator - freddyi 15:28:05 08/01/16 (0)