Is it true that the High Pass section of the N1201-8A crossover had a 'midrange suppression' circuit that helped balance the midrange and upper high frequencies?
The schematic seems to show 2 each of 3.9 ohm resistors parallel with a 6 uf cap after the 3rd order filter section???
I am working on some two way crossovers for system with a horn HF driver and wondered if this is a good way to get a little better response from the HF horns above 3k?
Would I use a Contour Filter to achieve similar results???
Thanks in advance
"Ad Astra Per Alia Porci", - To the stars on the wings of a pig: John Steinbeck
This post is made possible by the generous support of people like you and our sponsors:
Topic - Altec Model 19 - N1201-8A Crossover Question - Synthsayer 13:41:44 08/29/15 (17)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 09:33:45 09/03/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 13:01:37 09/02/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 11:31:39 09/02/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 11:20:53 09/02/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - DaveV 07:54:15 08/30/15 (12)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 09:45:36 08/30/15 (11)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 09:09:26 09/02/15 (1)
- Altec Model 19 does not use a... - Cougar 11:22:43 09/02/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - DaveV 13:22:42 08/30/15 (8)
- RE: Altec Model 19 - N1201-8A Crossover Question - Cougar 19:15:48 09/01/15 (1)
- RE: Altec Model 19 - N1201-8A Crossover Question - DaveV 19:48:12 09/01/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 13:05:16 08/31/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Steve O 18:05:13 08/30/15 (4)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 13:04:03 08/31/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - timoteus 19:34:55 08/30/15 (2)
- RE: Altec Model 19 - N1201-8A Crossover Question - Synthsayer 13:00:08 08/31/15 (0)
- RE: Altec Model 19 - N1201-8A Crossover Question - Steve O 20:08:57 08/30/15 (0)