Home VK Music - Elekit & Triode Japan Forum

Welcome! Need support, you got it. Or share your ideas and experiences.

RE: So...

Can't you or won't you answer my questions?
I did answer your QUESTIONS
I only recommend to upgrade 4 coupling caps (AMCO 0.1 X 4) and 4 cathode by pass caps (Sanyo OS-CON 180uf 16V). We tested our suggestion. It mentioned in THE MANUAL. YOU WANT TO USE 220uF. IT is your choice.


The link shows that there is a 220uf, 16V OS-CON. Why would you not recommend these capacitors (of any value, 180uf, 220uf, etc) for the output tubes after recommending them for the 12AU7 tubes? please refer to question 1

You say 220uf, 16V is too much capacitance for the output tube. Then why are 220uf, 16V capacitors included in the basic kit and a range of 150uf - 220uf is recommended in the instructions? If 220uf is too big, what value would your recommend for the outputs?

IT IS THE SIZE NOT THE CAPACITANCE. I only recommend to replace these 4 coupling caps and 4 cathode by pass cap.



Edits: 02/20/17

This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  


Follow Ups Full Thread
Follow Ups
  • RE: So... - vkung 09:25:50 02/20/17 (1)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.