In Reply to: RE: pas 3 tone controls posted by tubular.well on November 1, 2015 at 22:47:57:
Well, I'll answer my own questions on this one. I bypassed the tone controls following Curcio's instructions and ended with dc current at the outputs. Enough dc current in fact that the woofers on my speakers were popping in and out as if I was touching the leads on a 9volt battery. I then returned it to original and re-did the bypass following instructions from PeterCapo. This method included the addition of a 1.0uf capacitor to block the dc from the outputs. The results were quite profound. It was like a veil had been lifted from the sound. More focused and open. Overall a lot more of what I expected from a tube preamp. A lot more detail without loss of that tube musicality. I would recommend anyone considering doing the bypass to go ahead. It's easily reversible but I'm very happy leaving it as is.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: pas 3 tone controls - pcjosey 02:43:05 11/12/15 (1)
- RE: pas 3 tone controls - brian.py 05:52:16 07/17/16 (0)