Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Help! Musical Fidelity A3Cr amp owners! posted by nousaeous on August 31, 2002 at 19:06:05:
I had a major typo in my original response:"I had just 1 channel (for example, the left channel) from my preamp running in to my amp and I could hear the signal coming out of the left channel!!!"
should be
"I had just 1 channel (for example, the left channel) from my preamp running in to my amp and I could hear the signal coming out of the other channel!!!"
Reposted corrected version below:
While rejiggering my system, I noticed some pretty obvious channel crosstalk.
I had just 1 channel (for example, the left channel) from my preamp running in to my amp and I could hear the signal coming out of the other channel!!! While this amp works very well normally, I cannot help but think this is a major flaw, especially since this is supposed to be a dual mono design.
Is there any other explanation for what's happening? I would very much appreciate it if other A3Cr amp owners would try running only 1 channel in to their amps and see if they can hear both channels.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- correction: Re: Help! Musical Fidelity A3Cr amp owners! - nousaeous 19:08:11 08/31/02 (1)