Problem is teh main module a 2-way is port tuned to ~ ) 40 Hz but no HP filter - causing overload/cone-bounce - Timbo in Oz

Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Follow Ups Full Thread

Topic - Bi-Amping - Horizontal and Vertical - Lifer 16:41:02 10/02/16 (25)

RE: Bi-Amping - Horizontal and Vertical - SgreenP@MSN.com 21:18:20 10/04/16 (1)

Problem is teh main module a 2-way is port tuned to ~ ) 40 Hz but no HP filter - causing overload/cone-bounce - Timbo in Oz 21:58:46 10/04/16 (0)

Same approach I take with my HT - E-Stat 06:04:25 10/04/16 (1)

RE: Same approach I take with my HT - Lifer 12:31:01 10/04/16 (0)

Perhaps that is why I find the adjustment of frequency (now at 70 HZ) and the .. adjustments .. very finicky" - Timbo in Oz 23:16:57 10/03/16 (3)

RE: Perhaps that is why I find the adjustment of frequency (now at 70 HZ) and the .. adjustments .. very finicky" - Lifer 12:30:01 10/04/16 (2)

a correction, to use the Active crossover you would need to bypasss the passive LP crossover that is inside - Timbo in Oz 20:34:06 10/04/16 (1)

RE: a correction, to use the Active crossover you would need to bypasss the passive LP crossover that is inside - Kal Rubinson 05:56:33 10/05/16 (0)

RE: Bi-Amping - Horizontal and Vertical - A.Wayne 20:45:55 10/03/16 (1)

RE: Bi-Amping - Horizontal and Vertical - hahax@verizon.net 20:28:22 10/04/16 (0)

Sounds like horizontal to me. As far as I know, the term... - jeffreybehr 15:45:59 10/03/16 (1)

Review? - Timbo in Oz 23:37:20 10/03/16 (0)

RE: Bi-Amping - Horizontal and Vertical - erik_sq 08:48:17 10/03/16 (9)

RE: Bi-Amping - Horizontal and Vertical - Lifer 12:38:51 10/04/16 (3)

RE: Bi-Amping - Horizontal and Vertical - erik_sq 14:32:35 10/04/16 (2)

If you look at the review by Stereophile - Timbo in Oz 00:29:20 10/05/16 (0)

If you look at the review by Stereophile - Timbo in Oz 00:15:29 10/05/16 (0)

Review? - Timbo in Oz 23:39:06 10/03/16 (0)

RE: Bi-Amping - Horizontal and Vertical - pictureguy 20:02:45 10/03/16 (3)

RE: Bi-Amping - Horizontal and Vertical - erik_sq 20:17:11 10/03/16 (2)

RE: Bi-Amping - Horizontal and Vertical - pictureguy 20:52:41 10/03/16 (1)

Bi-amping with planars? - Timbo in Oz 00:06:56 10/04/16 (0)

Artemis Eos!!!!! - Kal Rubinson 06:45:00 10/03/16 (2)

See above? - Timbo in Oz 00:10:09 10/04/16 (0)

We took a pair in trade - Awe-d-o-file 09:17:42 10/03/16 (0)

Follow Ups

Problem is teh main module a 2-way is port tuned to ~ ) 40 Hz but no HP filter - causing overload/cone-bounce - Timbo in Oz 21:58:46 10/04/16 (0)

Problem is teh main module a 2-way is port tuned to ~ ) 40 Hz but no HP filter - causing overload/cone-bounce

Post a Message!