Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Cary CAD 300 SEI dropping out

My Cary is a little over three years old (just went off warranty in the spring) and I am experiencing audio dropouts in both channels. It occurs while playing all sources. I checked the bias and found it to be spot on so I swapped out the Sophia Output tubes first and put back in the original low hour tubes from Cary and the problem persisted. I then swapped out the three 6SN7 tubes and the problem persisted.

The dropout occurs at random times during a listening session. It sounds like a gradually fade out to near silence and then the sound gradually ramps back up to the original sound level. There are no clicks, pops, or static at any time. I have also noted the Power and Output transformers seem to be running cooler to the touch than I previously recall.

Any ideas out there? Could it be the power supply caps or coupling caps? Could my low hour Cary Tubes somehow be suspect; both channels drop out at the same time. If it is something simple I would first try a local shop but if the consensus is this could be more involved I would bite the bullet and ship it back to Cary and perhaps have things upgraded in the process.

Thanks,

John




Edits: 08/20/16

This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Topic - Cary CAD 300 SEI dropping out - badteacher 11:03:55 08/20/16 (21)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.