Very accurate MC phono preamp on proto-board

Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Topic - Very accurate MC phono preamp on proto-board - mwhouston 04:54:30 05/21/15 (23)

Is that a Dog Tag on top? - jedrider 08:57:31 05/22/15 (2)

RE: Is that a Dog Tag on top? - mwhouston 15:45:02 05/22/15 (0)

If you can use (5) or more check out this type of service... - DeKay 13:41:12 05/22/15 (0)

or built for 12.99 - Awe-d-o-file 19:37:20 05/21/15 (0)

Linn made a CD player named "Mimic"... - viridian 19:23:57 05/21/15 (7)

RE: Linn made a CD player named "Mimic"... - mwhouston 00:05:43 05/22/15 (2)

I was not calling into question the accuracy of your design... - viridian 09:56:04 05/22/15 (1)

RE: I was not calling into question the accuracy of your design... - mwhouston 15:45:53 05/22/15 (0)

Actually that's MimiK with a 'k'... - kuma 20:59:38 05/21/15 (3)

Kuma, I should know better.... - viridian 12:14:12 05/22/15 (1)

lol! (nt) - kuma 23:24:30 05/22/15 (0)

LOL, it's ALWAYS with a "K"........... - Ozzy 01:28:05 05/22/15 (0)

RE: Very accurate MC phono preamp on proto-board - A.Wayne 08:57:11 05/21/15 (5)

RE: Very accurate MC phono preamp on proto-board - mwhouston 15:47:18 05/21/15 (4)

RE: Very accurate MC phono preamp on proto-board - A.Wayne 16:00:36 05/21/15 (3)

RE: Very accurate MC phono preamp on proto-board - mwhouston 16:22:13 05/21/15 (2)

RE: Very accurate MC phono preamp on proto-board - A.Wayne 16:34:14 05/21/15 (1)

RE: Very accurate MC phono preamp on proto-board - mwhouston 16:39:56 05/21/15 (0)

Care to share the schematic, or are you planning loftier goals? - Dman 05:29:11 05/21/15 (4)

RE: Care to share the schematic, or are you planning loftier goals? - mwhouston 05:56:47 05/21/15 (3)

Thank you! - Dman 09:52:25 05/21/15 (2)

RE: Thank you! - mwhouston 15:40:58 05/21/15 (1)

It;s an SDS amp with a 254 amp module. Half the power of the 470... nt - Dman 20:42:33 05/21/15 (0)

Post a Message!