Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Thinking of going passive, and need advice

I've got a homemade pre-amp based around a board designed by Stan Warren, and after upgrading the chassis and volume pot, I've got some serious buzz in the left channel. I suspect it's a problem with the now 18 year old board, so I'm thinking of just taking the board out of the circuit, and going passive.

Here's my concern: I'm big on my vinyl, and I'm concerned about whether my phono stage can drive the amp. My phono stage is a Sonic Frontiers SFP-1 Signature, which has an output impedance of 1K Ohms. My cartridge in a 2.5 millivolt Blackbird, and calculating the 37 dB gain, that puts the output at ~1.8V. My amp is an Adcom 5400, with an input impedance of 49.9K, and the volume pot is a 25K Goldpoint.

Think it'll work?


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Topic - Thinking of going passive, and need advice - cdrayson 04:45:30 03/25/15 (19)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.