In Reply to: Magneplanar 1.6QR ribbon repair/replacement posted by RalphH on January 2, 2017 at 08:14:56:
You don't need to take the sock off to properly check the tweeter. Just remove the connector plate and you'll have access to probe the transducer wires directly. It's possible they did this and you didn't notice.
Regardless, as mentioned by Neo, it's possible a quick repair could be implemented on the tweeter. It's fairly easy to bridge a small break in the quasi-ribbon.....if that's all the problem is.
Cheers,
Dave.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Magneplanar 1.6QR ribbon repair/replacement - Davey 21:22:35 01/02/17 (3)
- RE: Magneplanar 1.6QR ribbon repair/replacement - RalphH 18:41:42 01/03/17 (2)
- RE: As Davey said removal of the sock would certainly enable you to identify the problem fully and ... - andyr 17:46:53 01/04/17 (0)
- RE: Magneplanar 1.6QR ribbon repair/replacement - Davey 10:21:20 01/04/17 (0)