Do It Yourself (DIY) paradise for tube and SET project builders.
Message Sort: Post Order or Asylum Reverse Threaded
6DK3 damper diode
1.125.48.103 |
||
Posted on January 27, 2015 at 19:26:39 | ||
Posts: 388
Joined: June 9, 2002 |
Hi there, The GE product data for 6DK3 does not specify mounting orientation. As per attached photo I've mounted these diodes in 'H plane' & having the odd failure after 6 months use. The PSU is dual mono FWCT using a C/L/C filter, the current demands are well within limits the load is 150ma / 500V & the input cap is 1.5uF The faulty diode when checked out of cct appear OK on DVM no obvious shorts or open cct's. When failure occurs it's typically after in rush when the diode is hot sometimes but not always the mains fuse 1.6A s/b will blow with gusto but not always & the replacements diode will work fine. The heater voltage is spot on 6.3V & the filter bleeder resistors are well de-rated. Being a rectifier ie 'GRIDLESS' I would have thought 'H plane mounting' would have been OK any thoughts ? Cheers Johno |