|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
144.132.145.71
In Reply to: RE: Dissagree posted by kotms on March 07, 2010 at 10:59:38
Thanks for all the suggestions. Points taken from above are
1)Clean the LP's (Have a 16.5 and the 3 step AIV fluids)
2)Ensure Stylus is clean too (At present I use the Zerodust Gel) and under the magnifying glass it looks clean. Have never used liquids.
3)Check antiskate, if too much.
The gear I am using since a few months is a Basis Signature 2800, Vector 4 arm and Lyra Helicon SC cartridge.
As I said this has happenned only on these 2 particular LP's.
Otherwise it works brilliantly on all the others LP's.
Thanks once again for your thoughts and suggestions.
Follow Ups:
If readjustments do not correct the problem, it could be a vinyl stamping issue. I have read about this here in the Asylum that sometimes the vinyl does not flow outward from the center of the press correctly and the left channel (inner groove wall) usually suffers most.
Good luck,
John Elison
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: