|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
50.108.28.21
In Reply to: RE: Knob caps for Fisher X-202-B? posted by tenor39 on September 28, 2016 at 13:36:09
I bought a set online for my Fisher X-101b, but gave the extras to Samara. Maybe Mikey can look at the package to see if there is the name of the party I bought mine from. The replacements looked great, but the brass was obviously more shinny than the originals.
Follow Ups:
Thanks. I just need the line/dash to be on the bevel rather than the face of the cap. I have looked for days online and have found none.
None of the ones I have or the ones Jerry gave me have that line.I need some of the lined ones as well.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Guys, so what I think I did was purchased the reproduction ones with no marking at all (see link - but I don't recall if that is the party I got mine from. Mine came in a pack of like 6 or 8). And as I look at my knobs I took a fine tip hobby type paint brush with some hobby gloss black paint, and made a very small dot on the bevel - approximately the size of the mark on the other caps. If you look close at the originals, I think that is actually an indenture into the cap. At 1-3 ft, I can not tell the difference. And a whole lot better than no cap. Mike, if you still have the leftover ones I gave you, see if there is a supplier name that you can pass on. They all came stuck to one large piece of paper as I recall. Their real cheap. Hope this helps.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: