|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
104.14.166.252
In Reply to: RE: Oyaide R1 outlet update. posted by alan m. kafton on September 04, 2016 at 02:39:38
OK, I'll give it a try during the work week when I normally don't have much time to listen to music. I assume my Model T vintage Cooker is up to the task? :)
Follow Ups:
Yes....it should be fine. The green LED might act a little differently due to the increased resistance (and mass) of the contacts within the duplexes, plus the two power cables, just so you are aware. Besides continuity, the green LED displays the pattern of the frequency sweep, which can alter slightly depending on that mass.
For instance, the pattern might look a little different when conditioning large caps, versus a group of power cables, or a daisy-chain of interconnects....the conductor mass is different. Nothing to worry about. It's a reactance issue.
RadioWonder:
Thank you for the pictures of your adaptors to condition multiple outlets at the same time. I have now ordered the materials to do make male to male jumpers to condition five outlets at the same time and have the ability to use the Ground Breaker adaptor so that the ground connection is also conditioned.
I am very impressed with the results of conditioning a Synergistic Research Tesla Plex outlet for six days. There was a significant improvement in an outlet that already had hundreds of hours of use.
The uses and benefits of the AudioDharma Cable Cooker continues to grow.
David Pritchard
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: