|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.62.145.78
multiple PLC's?
Follow Ups:
Yes, but not PLCs. I use 2 Monarchy anti jitter boxes in series between my drive and DAC.
I used a Balanced Power supply in line with a PLC.
Dynobots Audio
Music is the Bridge between Heaven and Earth - 音楽は天国と地球のかけ橋
No PLC can address every issue plaguing power lines. As a result most PLC's address on certain specific issues. Some address certain aspects, which others may have neglected.
I used mine in an semi industrial area (zoned residential/commercial) so I faced a multitude of different issues. I used an MIT Z Stabilizer alone (I had three dedicated lines, all non black wiring with decent duplex outlets, all jumpered over between duplex outlets). I used a Shunyata only for my power amps. For the front end and digital I had a Tice model 4 (IIRC), modified, feeding A PS Audio 300, various VansEvers smaller units.
The key I found was that you need to isolate EERY component from each other.
Of course YMMV
Stu
Actually, two power line conditioners, and one power distributor placed in series:
Oyaide R1 Beryllium AC outlet (installed at wall), VansEvers Reference Model 12 Analog power line conditioner (Spearinol oil capacitor-based PLC), Valab Power Distributor 8 Outlet Chassis (CNC machine milled aluminum alloy enclosure, laser polished top panel surface, milled AC outlet installation recesses, aluminum alloy feet), PS Audio UPC-200 power line conditioner (balun-based PLC, operating in dual zone mode). Three DIY Acrolink 6N-P4030 power cords (10 AWG ultra high purity, 6N uniform crystalline structure copper) terminated with Oyaide P-004 Beryllium AC plug and Oyaide C-004 Beryllium IEC connector feed the PLCs/power distributor, and all units have upgraded AC outlets and/or IEC inlets.
1. The VansEvers Reference Model 12 Analog power line conditioner is a single outlet PLC, intended for use by Mike Vans Evers for either a single component, or to feed other PLCs or power distributors placed downstream.
2. The Valab Power Distributor 8 Outlet Chassis (with x-cap noise filters for each AC outlet) feeds my amplification, subwoofer gear, DVD player, DIP, tuner, and the PS Audio UPC-200 power line conditioner.
3. The PS Audio UPC-200 power line conditioner operating in dual zone mode feeds my preamplifier, primary video gear, CD transport, and DAC.
Oyaide R1 Beryllium AC outlet → VansEvers Reference Model 12 Analog power line conditioner → Valab Power Distributor → PS Audio UPC-200 power line conditioner.
See my Inmate Systems page for more information:
But using multiple power conditioner type things. The champ of all of my power conditioners is my Environmental Potentials EP2050. I also have two of Alan Maher's gizmos, a Richard Gray Power Station, a Schumann frequency generator, and crystals placed in strategic locations. The combined effect of these devices is impressive, but they act in parallel, not in series.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: