|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
63.246.183.22
In Reply to: RE: yes, that's the one posted by deafbykhorns on December 06, 2016 at 17:47:37
My process is to...
1. Remove it form the board (solder wick works OK for this)
2. Cut the two primary leads at the terminals
3. Remove the bit of remaining wire soldered to each terminal
4. Resolder the windings after removing all but one turn on each side of the primary
Vinnie, I can photograph this process if you want. I'm home from work today, so I have time to do this if it would be helpful.
--------------------------
Buy Chinese. Bury freedom.
Follow Ups:
Yes please! I am having a hard time understanding the process, and I really want to try this so I give it a fair trial. Thanks!
The center winding does not have any wraps.
The outside windings are just one wrap, not sure if direction makes a difference but I would think so, keep each winding identical just in case...
Edits: 12/07/16
Thanks, I will try that in the morning.
.
Thanks deaf, that will help a lot in the morning. I will let you know how it turns out.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: