|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
1.125.49.42
In Reply to: RE: Is running DHT's in H plane Ok ? posted by drlowmu on August 12, 2016 at 12:49:33
Hi Jeff,
always a dilemma for DIY builders testing equipment under the bonnet post build. Avoiding a hernia from lifting is a personal priority.
I destroyed a pair of expensive KR300B's back in 2000 testing amp in H plane. So today I test my completed builds using a adjustable wood cutting horse sitting on a work bench with the amp on top, amp sits vertical & relatively comfortable to work under.
PS - The statement posted by Paul by 'WE'
"The 300B spec sheets indicate the filament plane as pins 1 and 2, which must be vertical if the tube is horizontal".
Question - How can a valve mounted in H plane & maintain V filament ?
Cheers Johno
Follow Ups:
So, you speak from direct experience. Sorry to hear about the loss. Thanks for sharing it with us all.
The difference in a cap being in and out 180 degrees in a circuit is a bigger fish to fry, IMHO.
The difference between me modding a lovely DynamiCap 4.0 E, using either one ( or using two runs, in parallel ) of 16 AWG Mil Spec wire as the cap's lead out, is totally HUGE on my " very well wired " high efficiency speaker crossovers, as it was in my 45 amp, with a 0.033 uF teflon...in each case, a single cap !!
And what is interesting is, few DIYers in audio has gone at this, full bore.
In the weeks ahead, I will gain first - hand doing and listening experience. Lovely....can't wait to hear the end result.
Jeff
You probably use more Dynamicaps than I do, but I would warn you to be very careful if you are messing with the leads at or near where they enter into the body of the capacitor. Dynamicaps, like the Infinicaps that went before them, are very fragile where there is a glop of solder between the lead and the body.
Apart from that, I would be very interested to know whether there is any trend to your findings about capacitor orientation, using the listening method. Are you finding in general that what is considered electrically optimal (outer foil toward lowest impedance) is also optimal for your subjective evaluations? Or is there no consistent relationship? Thanks.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: