|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.249.169.177
In Reply to: RE: Audio-GD Master 7 question posted by thetubeguy1954 on October 12, 2016 at 16:17:54
Thanks,
I have all the Master 7 info
It just sometimes conterdicts itself
I now have it setup the way I want
Alan
Follow Ups:
When I tried my Master 7 at true NOS, I had phase trouble with 16/44.1 material... higher res was fine.
I needed to use a test CD to ultimately confirm this, but it drove me crazy for a while due to much of my files are high res, so the (not so noticeable) out of phase effect seemed to be intermittent.
I ended up using the "warmest" jumpers setting from the Audio-GD website, which I think is actually 2X oversampling, and this worked so well I eventually changed my Master 7 to the NOS 7 model.
This site helped a lot to understand the settings also:
http://www.basshead.club/audio-gear/master-11-info/
Of course there has been some confusion with what is true NOS on the master 7
I do it ths way
Bypass- jumper off
IPSO jumper on
IPS1 jumper on
According to KingWa this is NOS
No phase problems what so ever
When I asked King Wa should I get the NOS 7 he said it would be a sideways move and not to do it
Either way the Audio-GD stuff is really special
Alan
Thanks for the additional comments Alan...
I tried this today with my NOS7 (removing the BYPASS jumper)
Wow... nice.. now no phase problems using my Tanly DDC via i2S.
Sometime I need try this with my SU-1 also..
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: