|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
73.239.106.81
In Reply to: RE: subwoofer interconnect for my Rythmik F12SE posted by spoutjack on October 08, 2016 at 16:58:38
If you are using a preamplifier with two sets of stereo rca outputs, one set into a stereo power amplifier, and second set into a subwoofer with both left and right channel inputs, then you'll need a stereo pair of rca interconnects, like your main power amplifier would require.
Follow Ups:
Thanks Duster. I use the Hegel H160 integrated amp. It has one LR line out(Variable) and then I want to feed it to the amp on sub but then al the sub woofer interconnects I see are single shielded cable. Should I use Y Splitter on both sides in that case?
Since the Hegel H160 is an integrated amp, you only require one set of stereo interconnects in order to connect the variable stereo outputs to the subwoofer. If the subwoofer has only a single rca input, you will either need a Y-adapter or splitter at one end or the other. If so, I would recommend running a stereo pair of interconnects from the variable line-level outputs of the Hegel H160 integrated amp, and then use a splitter/joiner at the subwoofer end in order to keep the stereo signal intact until it's joined at the subwoofer end of things. This method would provide better overall signal integrity for a stronger bottom-end, IMO.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: