|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
172.9.116.164
Used high end component video cable is virtually worthless in a world of HDMI.
Can component video cable become a source for high quality DIY audio IC or are the electrical considerations too disimilar ?
Best, Ross
Follow Ups:
Video cable will pass a line level audio signal, but it is not the best solution
Thansk all.
Component video cable has different requirements for high performance than audio cables, some aspects overlap, others have no relevance from one to the other.Basically, you can "get away" with certain materials and construction compromises on a video cable that are not acceptable for a high performance audio cable.
That said, some video cables intended for commercial video use can make an excellent audio cable, mainly through the happenstance of good materials and decent construction from an audio standpoint.
Belden 89259 is a good example.
For more along these lines, see:
The skinny on RG-6 coaxial cables for audio:
http://www.AudioAsylum.com/audio/cables/messages/25155.htmlSee also:
http://www.geocities.ws/jonrisch/i1.htm
Jon Risch
Edits: 01/31/16
Kimber Kable. described as RG6 75 ohm. No connection to seller etc etc.
Thanks.
Kimber Kable Illuminations DV-30 should perform well for a line-level application, but it's better implemented for a 75 ohm application.
I've found component video cable a great back up for phono or the CD deck.
YMMV, I'm guessing the extra shielding required for video signals is right inline for decent audio hookups? Frankly, the $20 Best Buy video cable I used for my table wasn't bad compared to the name brand $$ "phono cable" that I just had to have. I wouldn't be surprised the degree of "incorrectness" varies with brands.
It was just different in its presentation and certainly didn't look cool like the fancy one I have now.
I still use them for my cheap tuner which sounds great, just not Marantz 10B great!
It depends on the video cable design. What particular make/model video cable do you have in mind?
As phono cables. I have a set of Vampire Wire and Synergistic Research and another brand I can't identify to compare against my MAC Silver and Neotech 30001 cables.
"It's all fun and games until someone doesn't pick up on the sarcasm"
Edits: 01/29/16
I look forward to your report in Cable Asylum.
The Synergistic Research was not much different than any other other I/C. There was the same fuzzy vocal, diffuse soundstage. Now, as far as the Vampire Wire, there is a clarity and very neutral tone and soundstage. There is not as much depth but appropriate width and players being where they belong. It's interesting how there's no extra bass, midrange or highs. Neutral is.subjective but, this is as close as I've heard.
"It's all fun and games until someone doesn't pick up on the sarcasm"
What model is the Vampire Wire cables?
I tried to provide a pic. However, no luck. The cable says USA CG SERIES OFC VIDEOI. It's a fairly thin blue cable.
"It's all fun and games until someone doesn't pick up on the sarcasm"
Is this the same cable, with the same rca connectors?
See link:
I can hear vocals clearly and the soundstage is solid. I never even considered component video cables in this way. Obviously, things are not absolute regarding cables.
"It's all fun and games until someone doesn't pick up on the sarcasm"
The Vampire cable should perform well for audio applications, but that Vampire rca connector is poor sounding, IME. That particular model rca connector is intended for video applications, not audio.
If you wish to experiment, I recommend re-terminating the cables with audiophile quality rca connectors. It would be a worthwhile expense.
you listen to them. Most of the Vampire connectors get pretty good reviews. I'm interested in your take after you test them against your everyday phono cables..
"It's all fun and games until someone doesn't pick up on the sarcasm"
Image: Vampire 557-Y RCA Video Connector
I've already listened to the audio performance capability of the Vampire 557-Y rca video connector.
So I'm very familiar with the sonic signature of it, based on direct experience. It's not an audiophile quality connector, IMO.
See link:
to my home to listen for yourself. I'll cook a nice meal for you. You can meet my family and tell us all how we are listening to the wrong cables.
"It's all fun and games until someone doesn't pick up on the sarcasm"
Just giving good advice, IME.
The Vampire cable features OCC copper likely made by Neotech.
It deserves a better rca connector than the Vampire 557-Y for an audio application.
'nuff said
We're all trying to help but, you always seem to want to be the first/last word regarding cables. Much of what you offer is from the bleachers, not from the playing field. I hesitate helping others because you negate real experience with IME.
"It's all fun and games until someone doesn't pick up on the sarcasm"
I am offended by your attitude and accusation. I am very experienced and don't speak from the bleachers. I won't defend my credibility nor my sincerity as a participant in Audio Asylum.
You act like the know-it-all of cables.
"It's all fun and games until someone doesn't pick up on the sarcasm"
Duster wrote:
"...If you wish to experiment, I recommend re-terminating the cables with audiophile quality rca connectors. It would be a worthwhile expense."
What part of my informed opinion seems like that of a know-it-all?
Audio Asylum is intended as a forum where folks can post their various findings without personal hostility from other posters. I simply responded with basic advice. You are way out of line, mt10425.
Duster
is that you listen before you judge.
"It's all fun and games until someone doesn't pick up on the sarcasm"
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: