|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.98.6.89
In Reply to: RE: Creek Audio 5350SE - no output posted by Bigdaddy999 on October 14, 2016 at 20:02:30
check to see if there is a voltage switch on the back. like 120/240. or does it need jumpers for the preamp/amp connection?
recheck the controls - daa but it happens. Does it light up. Or just dead with no indicator light?
Follow Ups:
No switches on the back. Lights up / powers up fine. Light goes yellow, the 'clicks' to green. All relays appear to work with other controls, as you can hear them function (speaker, source all work).
So it sets up like it normally should be working. Indicator lights not on protect mode and the relays click in like they always did????
If there are separate jacks on the rear for preamp/amp can you jump them together? Open it up and see if there are any internal fuses???
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: