|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: heat shrink on the tonearm posted by Frank_Locke on October 29, 2004 at 08:08:15:
I reset the VTF with a Shure scale after adding the heat shrink. I had no problem hitting the target VTF. If you are having trouble with VTF adjustments, make sure that the bearing adjustment screws on the pivot are tightened just enough to prevent free play, but not so much that they restrict movement and true VTF readings. (I made this mistake once.)If you don't like the sound after the heat shrink is placed, you can carefully cut it off with a razor blade/utility blade. It does not bind to the arm and will just peel away.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: heat shrink on the tonearm - joeychitwood 08:16:32 10/29/04 (1)
- Thanks for all the info! (nt) - Frank_Locke 08:37:18 10/29/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
