Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Mearuring crosstalk for adjusting azimuth - addendum.

Hello again,

Reading back over the above post, I must confess to having given the wrong impression in the procedure.

Whichever method is used for measuring crosstalk, the aim is not necessarily to have an equal result for both channels. Equal crosstalk in both channels would be optimum of course, however not if achieving that was at the expense of the absolute result in either channel.

The aim of adjusting azimuth for minimum crosstalk is to achieve the lowest figure for crosstalk in whichever channel gives the worst result.

For example –29db left and –35dB right is a better result than–26dB left, and –26.5dB right, despite the fact that the difference between the left and the right is greater in the first case.

Sorry about the seemingly contradictory recommendations. I still recommend the second method for measuring the crosstalk.

Best regards,

Brian


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • Mearuring crosstalk for adjusting azimuth - addendum. - bkearns 11:49:40 07/21/02 (0)


You can not post to an archived thread.