Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Re: Mearuring crosstalk for adjusting azimuth

The voltages which you posted would correspond to a crosstalk of -22dB for the first pair and -23dB for the second pair.

Your mistake was not taking the log of the V2/V1 before multiplying by 20.

-22 to -23dB is an acceptable result, though a very good figure would be closer to -30dB Whether your figurs are optimum depends the cartridge you are using.

You could try adjusting the azimuth one way or the other to see if a larger difference in the voltages results.

But if you are happy with the set-up as it is, then please remember the following adage: “If it ain’t broke, don’t fix it”!

Brian


This post is made possible by the generous support of people like you and our sponsors:
  Amplified Parts  


Follow Ups Full Thread
Follow Ups
  • Re: Mearuring crosstalk for adjusting azimuth - bkearns 06:12:51 07/18/02 (0)


You can not post to an archived thread.