Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Mearuring crosstalk for adjusting azimuth posted by bkearns on July 17, 2002 at 07:27:59:
Thanks for the info Bkearns. I used the Cardas record for the 1kHz left and right tones. My measurements into a Fluke 77 volt/ohm meter are:
V1=583 vac
V2=46 vac
and
V1=630 vac
V2=45 vacMeasurements were made with the speakers connected and amp volume at about 1/4 turn. Is it as simple as trying to balance these numbers by means of azimuth adjustment. I read your post several times and I'm a bit confused about the means of arriving at the dB. For example:
20 x (46 / 583) = 1.578. Is this correct? Sorry if I seem like an idiot. I'm trying to get it right.
Terry
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Mearuring crosstalk for adjusting azimuth - gear119348@aol.com 17:40:07 07/17/02 (1)
- Re: Mearuring crosstalk for adjusting azimuth - bkearns 06:12:51 07/18/02 (0)