Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Help with SS Zephyr MIMC and VPI 3D Arm Please! posted by louie3 on October 16, 2016 at 10:16:41:
Thanks for not making fun of me-my fingerlift is facing in and not out. Got that corrected-Duh! I notice too that with my Benz Glider which is installed on a second Prime 3D arm, same exact thing-I had to shove the cartridge almost all the way back (as opposed to ALL the way back with the Zephyr). But with my Benz Glider, I was still easily able to view the cantiliver to align it. I got the Zephyr aligned with the help of my handy-dandy "Illuminated Dual Lens Flip-In Head Magnifier" but like I say, I just don't care for the aesthetics. To me, it looks kludge-y. I still have to ask-are these two cartridges outliers and do most cartridges have shorter screw mount to stylus tip distance? I tend to think not and that VPI could do a better job designing the slots.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help with SS Zephyr MIMC and VPI 3D Arm Please! - FSonicSmith 10:58:35 10/16/16 (9)
- Minor aside on fingerlift - YRY 11:35:59 10/17/16 (1)
- RE: Minor aside on fingerlift - FSonicSmith 11:42:56 10/17/16 (0)
- RE: Help with SS Zephyr MIMC and VPI 3D Arm Please! - John Elison 12:19:15 10/16/16 (4)
- John, you measured spindle to pivot on mine and it was correct. - volunteer 13:08:14 10/16/16 (3)
- RE: John, you measured spindle to pivot on mine and it was correct. - John Elison 13:20:59 10/16/16 (2)
- RE: John, you measured spindle to pivot on mine and it was correct. - FSonicSmith 14:01:22 10/16/16 (1)
- RE: John, you measured spindle to pivot on mine and it was correct. - John Elison 14:18:23 10/16/16 (0)
- RE: Help with SS Zephyr MIMC and VPI 3D Arm Please! - louie3 11:13:06 10/16/16 (0)
- I have a SS Ortofon MC-20 mounted on my 3D arm. - volunteer 11:05:31 10/16/16 (0)