Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
When testing my Grace 707 bearings by slightly rocking the headshell, I noticed that the headshell rotated on the chrome arm tube.. I have always wondered about the function of the small set screw on the underside of the headshell(see arrow), as the owners manual makes no mention of this.
So, my question is: Can the set screw be used to adjust azimuth for this tonearm. Actually, I will have to do something now that the headshell rotated slightly. There is some type of material at the junction of the chrome arm tube and the black headshell, and I am assuming that might have been old glue.
Any help appreciated. Thanks.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Grace 707 azimuth adjustment? - alaskahiatt 01:26:00 10/16/16 (11)
- RE: Grace 707 azimuth adjustment? - Kingshead 16:36:21 10/19/16 (5)
- No I haven't, so thanks for the good recommendation. I wish I could - alaskahiatt 20:23:22 10/19/16 (4)
- RE: No I haven't, so thanks for the good recommendation. I wish I could - Kingshead 02:17:58 10/20/16 (3)
- Wow, thanks for this recommendation and your actual experience. - alaskahiatt 11:39:30 10/20/16 (2)
- RE: Wow, thanks for this recommendation and your actual experience. - Kingshead 18:26:02 10/20/16 (1)
- The repair worked! I did just what I said, and it looks like the glue - alaskahiatt 16:18:56 10/21/16 (0)
- RE: Grace 707 azimuth adjustment? - SoundMann 08:53:27 10/16/16 (4)
- I just pulled this tonearm off a freebie, water damaged, old Luxman PD 270 table, so - alaskahiatt 11:47:19 10/16/16 (3)
- RE: I just pulled this tonearm off a freebie, water damaged, old Luxman PD 270 table, so - SoundMann 13:55:42 10/16/16 (2)
- I understand, and I haven't touched the screw since I received the turntable. - alaskahiatt 15:09:25 10/16/16 (1)
- RE: I understand, and I haven't touched the screw since I received the turntable. - SoundMann 21:48:52 10/16/16 (0)