Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Looks very nice, now . . . posted by M3 lover on October 12, 2016 at 17:11:30:
I agree with replacing the electrolytes, but do not do it without having a good scope handy. The timing adjustments maybe waaay off once you removed and replaced the caps in the table itself. Replacing the caps in the PSU has no effect on timing. Follow the timing adjustment described in the service manual to a T. and make sure you get the timing as close to the center of the range provided as you can. Before you connect the PSU to the table after replacing the caps check the voltages for value and also for noise.
dee
;-D
True terror is to wake up one morning and discover that your high school class is running the country.
quote by Kurt Vonnegut
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Words of warning :) - Penguin 17:34:41 10/12/16 (4)
- Not to pick nits,... (Repair of the Mk2 and Mk3) - Lew 07:03:40 10/19/16 (0)
- Yes, and - M3 lover 10:14:29 10/13/16 (2)
- if you only replace the psu caps - Penguin 12:12:06 10/13/16 (1)
- So my question - M3 lover 16:07:47 10/13/16 (0)