Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
I have a 1983 Akai AA-R22/L with an original instruction manual that gives some strange specifications to me. I realize some spec sheets are questionable and misleading. This gives its rated power output of 30 watts per channel minimum RMS at 8 ohms from 20 to 20,000 HZ with no more than 0.05% THD. As you scroll down it gives the frequency response for AUX/TAPE as 5 HZ to 80 kHz-3dB. As for PHONO it gives only 30Hz to 15,000 kHZ-+0.5 dB(RIAA)! This seems like a huge disparity to me. What gives? Did Akai just cheapen its PHONO section? Or are many amps and receivers just less honest in giving their specs?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Akai AA-R22/L Receiver question - Nadguy 11:42:47 07/29/14 (4)
- RE: Akai AA-R22/L Receiver question - John Elison 14:32:18 07/29/14 (2)
- RE: Akai AA-R 22/L Receiver question - Nadguy 17:22:58 07/29/14 (1)
- RE: Akai AA-R 22/L Receiver question - John Elison 18:17:36 07/29/14 (0)
- RE: Akai AA-R22/L Receiver question - Nadguy 11:46:39 07/29/14 (0)