|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Neat Idea.... posted by Mike B. on February 7, 2003 at 14:10:56:
Actually, the board is teflon with copper on both sides. The area of the capacitor plates (copper) and thickness of the dielectric (teflon) determine the capacitance. You would solder leads to each side of the copper faces.C = eA/d
where C is the capacitance, e the permittivity of the dielectric (teflon) between the plates (copper layers), A the area (of the copper) and d the separation between plates (i.e. thickness of teflon).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Neat Idea.... - Monolith 14:35:46 02/07/03 (5)
- Re: Neat Idea.... - Mike B. 08:25:01 02/08/03 (3)
- Re: Neat Idea.... - rcrump 10:19:21 02/08/03 (2)
- Re: Neat Idea.... - RonS 11:07:57 02/11/03 (1)
- Re: Neat Idea.... - BFitz 08:08:29 02/15/03 (0)
- Epsilon-zero - Sector-7G 15:12:53 02/07/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
