Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Zerozone Linear Power Supply posted by pixelphoto on October 12, 2016 at 10:22:10:
Topic: Zerozone DC jack pinout.
Image: To the left: Inside view of Zerozone PSU enclosure. To the right: Rear view of 2-pin male jack with a 2-pole female connector plugged into the jack:
Pin 2 negative (-) is located on the left (blue wire), pin 1 positive (+) is located on the right (red wire).
---
This type of jack is called a GX16-2 a.k.a aviation or Cobra microphone jack. I can't find official information, but by visual inspection this is what I found:
For the Zerozone PSU DC output jack, pin 1 is positive, pin 2 is negative.
Another way of determining which pin is which without looking inside the enclosure:
The Zerozone DC jack has a protrusion within the connector entry point oriented at the top for proper polarity. When viewing the DC jack from the *outside of the enclosure*, the right pin corresponds to negative (-), with the left pin being positive (+).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Zerozone Linear Power Supply - Duster 14:53:14 10/12/16 (5)
- RE: Zerozone Linear Power Supply - pixelphoto 16:04:41 10/12/16 (4)
- RE: Zerozone Linear Power Supply - Duster 19:47:16 10/12/16 (3)
- RE: Zerozone Linear Power Supply - pixelphoto 21:34:37 10/12/16 (2)
- RE: Zerozone Linear Power Supply - Duster 06:02:29 10/13/16 (1)
- RE: Zerozone Linear Power Supply - pixelphoto 10:53:13 10/13/16 (0)