|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Oyaide R1 outlet update. posted by David Pritchard on August 29, 2016 at 20:10:51:
Hi, David....to condition a duplex outlet on the Cable Cooker, one would simply require a second 15-amp IEC adaptor (part of the power cable adaptor set).One IEC adaptor would install into the upper left set of binding posts, and the other IEC adaptor would install info the lower right set....similar to the setup for conditioning power cables, excepting you'd be using two IEC adaptors.
For the duplex, you would connect a power cable's wall plug into the top receptacle of the duplex, and a second power cable's wall plug into the bottom receptacle. The respective IEC ends of the power cables would be connected to the two IEC adaptors, which are in turn installed into the proper binding post sets of the Cable Cooker. It's really easy.
Radio Wonder's set up is a little more sophisticated, as he fashioned his own adaptors for this purpose, but he's been doing this quite successfully for years.
With my special adaptor setup (for daisy-chaining multiple duplexes), I've been conditioning 4, 6, 8....even a dozen duplexes simultaneously for many years.
I should also add that, with this installation of two IEC adaptors, you also get to condition (or re-condition) two power cables at the same time. Very convenient.
Edits: 08/30/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Oyaide R1 outlet update. - alan m. kafton 15:26:03 08/30/16 (2)
- RE: Oyaide R1 outlet update. - bcowen 16:15:24 08/30/16 (1)
- I like your thinking, Sir.... - alan m. kafton 17:08:18 08/30/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
