|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Help ! :( posted by KanedaK on August 26, 2016 at 01:53:03:
Do you have a multimeter? If so, measure the voltage on the output plug, using the VDC setting on the meter. If it is a DC PS, you will measure 12V or so. If it is AC, you will read very low or nothing. That should tell you.
If you are serious about this hobby, you need a fairly decent multimeter, and a scope would be your best friend. A good used analog scope can be found for very reasonable prices these days.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help ! :( - Hornlover 09:04:29 08/26/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
